Device
From BioStar 2.8.16, you can use X-Station 2 as a slave device for CS-40. Please notice that you need to match the BioStar 2 and CS-40 firmware versions to ...
Wed, Sep 25, 2024 at 3:46 PM
ENCR-10 is enclosure for Suprema controller CS-40 and output module OM-120. One unit of CS-40 or 2 units of OM-120 can be equipped in ENCR-10. How to in...
Wed, Sep 25, 2024 at 3:44 PM
Article Author: Krista Kim All Suprema fingerprint devices can connect to CS-40 as a RS-485 slave device. Supported devices are BioStation A2, BioStatio...
Wed, Sep 25, 2024 at 3:10 PM
Author: Krista Kim, Sales Manager I Suprema Europe 1. CS-40 Network Reset and Factory Default Q1: How to reset the CS-40 network? A: Push th...
Wed, Sep 25, 2024 at 3:04 PM
The author of the article is Krista Kim who is in charge of CS-40 Sales. ------------ We would like to guide you on how we can replace the site where 3...
Wed, Sep 25, 2024 at 3:01 PM
Below is a sample CS-40 2 setup with 2 slave devices and 3 Wiegand Readers to control 5 doors. You can add each device as a separate door in the Door ...
Wed, Sep 25, 2024 at 2:58 PM
Maximum Devices Per Port CS-40 has 5 RS-485 ports and in total CS-40 supports maximum of 64 slave devices but each port supports up to 31 slave devices wit...
Wed, Sep 25, 2024 at 2:56 PM
Suprema's CS-40 raises the bar for ease of use and streamlined maintenance for an access controller. Discover in this video how you can easily manage ...
Wed, Sep 25, 2024 at 2:49 PM
The author of the article is Krista Kim who is in charge of CS-40 Sales. ------------------------- From CS-40 f/w version 1.3.1, you can access SETUP ...
Wed, Sep 25, 2024 at 2:46 PM
BEW2 & BEP2 With the BEW2 and BEP2 device, you can reset the network by pressing the network reset button behind the device. If you want to fact...
Wed, Sep 25, 2024 at 2:41 PM