The custom smart card layout is supported on the following products once you match the correct version. If you would like to check what the custom smart card layout function is, please check the relevant article below.
- Relevant article
- BioStar 2 - [BioStar 2] How to Setup Custom Smart Card Layout
- Suprema Device Manager - [Device Manager] How to Use Custom Smart Card Layout
| Product | Version | Product | Version | |
| BioStar 2 | v2.9.4 or above | Suprema Device Manager | Android | v1.1.8 or above |
| iOS | v1.1.8 or above | |||
| XPass D2 | v1.7.1 or above | BioEntry P2 | v1.5.1 or above | |
| BioEntry W2 | v1.8.0 or above | BioStation 2a | v1.1.0 or above | |
| XPass 2 | v1.4.1 or above | X-Station 2 | v1.3.0 or above | |
| BioStation 3 | v1.3.0 or above | FaceStation F2 | v2.2.0 or above | |
| BioLite N2 | v1.6.2 or above | |||
* Please note that you need to use the device with supported firmware for RS-485 Master to use the custom smart card function on the RS-485 Slave device through the BioStar 2.