Dear Valued Partners,  


BioStar 2 v2.7.8 is now available from our website. 

Please check the below and keep to use the latest version of BioStar 2.


Some features of BioStar2 SW are available to use with FW upgrade. 


The below devices are available to upgrade to use new features.

- CS-40, BioEntry W2, BioStation L2, BioEntry P2


The firmware files of the below devices will be released by middle of August.

- BioStation 2, FaceStation 2, BioStation A2, BioLite N2



New Feature & Improvements

1. Enables users to search for visitors using fingerprints in the visit application page and VISITOR menu.

2. Supports user group synchronization in Active Directory.

3. Allow to set duplicated Controller as CS-40 to different elevator list.

  • Available to configure duplicated controller information to other elevator information:  CS-40
  • Details: Allow to set duplicated Controller as CS-40 to different elevator list, it's allows up to 32 duplicated configuration with CS-40.

  • Please note that it doesn't mean the specification change of OM120 and the maximum number of RS485 slave devices of CS-40. For more details, please refer the below FAQs. 

    • Q1) How many OM120 devices could we configure to one single CS-40 for using Elevator?
      A) It's same as before. It can be configured with up to 16 OM-120 units for Elevator. OM120 Specification

    • Q2) How many RS485 Slave devices could we configure connect to one CS-40?
      A) It's same as before. Each RS485 port of CS-40 supports up to 31 slave devices with daisy chain, BUT the total number of Slave devices of CS-40 can have up to 64 slave devices. For more details, please refer the link below.
      [BioStar 2] Maximum Slave Devices with CS-40

    • Q3) What is the updated feature of  BioStar v2.7.8 about the relevant Elevator&CS-40?
      A) BioStar2 v2.7.7 or lower version confirms the validation whether a Controller information of Elevator is duplicated with other Elevator configuration. And it blocks to configure if it is duplicated controller information with other Elevator information. BioStar v2.7.8 allows to set same CS-40 for Controller of each Elevator information. It's change for UI part of BioStar2 SW. You can configure duplicated controller configuration with CS-40 up to 32.

4. Supports Anti-Tailgating. [Recent FW is required]


5. Supports setting options for Wiegand authentication result output. [Recent FW is required] 

  • User ID and Card ID


6. Supports options for selection by card type. [Recent FW is required] 


7. Supports an option of the fingerprint/face duplicate check when registering users on a device. [Recent FW is required]



Bug Fixed

1. A user cannot access to BioStar 2 if the language is set to Turkish on Windows.

2. A user cannot access to Biostar 1.x to BioStar 2.x Migration Tool in an environment using Oracle database.

3. Some logs are missing during log migration in Biostar 1.x to BioStar 2.x Migration Tool.

4. The user information is not indicated in <Manage Users in Device> menu.

5. Errors occur when setting the period entry for user or visitor registration if the date format is set to 'dd/mm/yyyy'.


Caution 

- Upgrade needs to be made carefully  following the below link. 

  biostar2  update procedures

 

- Please make sure to make DB backup before upgrade, in order to avoid any  possible data loss. 

   Database  Backup and Restore Instructions

 

 

Download Page

Please check its revision note, and use this the latest version from your next deployment.

https://www.supremainc.com/en/support/biostar-2-pakage.asp